Skip to content

Building HVAC Controls (BMS)

Controls solutions that create smarter buildings by a modern wireless approach but still leaving the option open for wired solutions aswell so you get the best of both worlds.

Reduce your man hours on installation by utilising Nube-iO bi-directional LoRa communication

Nube Icons-24

Integrate mechanical assets, 3rd party BMS and other equipment into one system with protocols like LoRa, BACnet and Modbus

Nube Icons-25

Two-way communication and control between devices and the cloud or via BACnet/IP

Nube Icons-21

Wireless comms between devices to reduce installation cost

Nube Icons-26

Device-level logic + alerting independent of cloud connection

BMS vs IoT Comparison

Existing BMS

FRAGMENTED SOLUTIONS
Existing BMS solutions provide fragmented layers making integration difficult with a requirement to use multiple products to achieve a satisfactory outcome

HIGH INSTALLATION COSTS
Most building BMS require specialised knowledge and significant resources to implement

HIGH MAINTENANCE COSTS
Due to the complexity of most solutions on the market, replacing items in the stack leads to significant downtime

OUTDATED TECHNOLOGIES
Completely wired and cumbersome, these solutions utilise technologies that are restrictive, outdated, proprietary and unsecure

DIFFICULT TO SCALE
Adding a new sensor or removing one from the system is a complicated process

NUBE IO

COMPLETE SOLUTION
From environmental and asset sensors, to controllers, to BMS software – Nube iO offers the full stack local or cloud solution

LOW INSTALLATION COSTS

Each monitor is LoRa-enabled. No wiring, no wiring means less risk and less disruption

LOW MAINTENANCE COSTS
Swap out a sensor in a matter of minutes. No downtime, no waste of resources

POWERFUL TECHNOLOGY
Nube iO has bought current web based technologies that are used in other industry leading software and hardware applications to the BMS industry

EASY TO SCALE
Install a new wireless sensor and connect it to the Rubix Compute in under a minute

Nube iO’s Building HVAC solution will allow you to seamlessly control your HVAC equipment.  Set up custom alerts, optimise performance, and reduce operational costs.

Our system capabilities

Avoid lengthy cabling

Reduce installation costs and tenancy disruptions with wireless devices.

Reduce time and cost

Add a new device in a matter of minutes.

Future-proof your solution

Seamlessly scale your system up or down. Replace components without having to worry about costly installation and maintenance fees.

Keep on top of technology trends

Easy remote updates and increased equipment lifecycle duration.

Just a few of the benefits

Wires is an easy to use browser-based programming tool thatallows users to remotely program BMS and IoT projects.Flow-based and real-time editorDrag-and-drop styleIntuitive UISimilar to other well known BMS commissioning interfacesBACnet, Modbus, LoRa and LoRaWAN readyPre-built nodes (blocks) for PAC, RTU and FCU control

Easy-to-use platform and logic design tool that significantly reduces engineering time and complexity​

Wires is an easy to use browser-based programming tool thatallows users to remotely program BMS and IoT projects.Flow-based and real-time editorDrag-and-drop styleIntuitive UISimilar to other well known BMS commissioning interfacesBACnet, Modbus, LoRa and LoRaWAN readyPre-built nodes (blocks) for PAC, RTU and FCU control

Reduces labour cost with wireless zone sensing

Wires is an easy to use browser-based programming tool thatallows users to remotely program BMS and IoT projects.Flow-based and real-time editorDrag-and-drop styleIntuitive UISimilar to other well known BMS commissioning interfacesBACnet, Modbus, LoRa and LoRaWAN readyPre-built nodes (blocks) for PAC, RTU and FCU control

Easy and scalable solution for multi site BMS – i.e., shopping malls, retail outlets

Wires is an easy to use browser-based programming tool thatallows users to remotely program BMS and IoT projects.Flow-based and real-time editorDrag-and-drop styleIntuitive UISimilar to other well known BMS commissioning interfacesBACnet, Modbus, LoRa and LoRaWAN readyPre-built nodes (blocks) for PAC, RTU and FCU control

Specifically designed to meet the needs of smaller building where there is no return on investment for installing traditional BMS solutions

Wires is an easy to use browser-based programming tool thatallows users to remotely program BMS and IoT projects.Flow-based and real-time editorDrag-and-drop styleIntuitive UISimilar to other well known BMS commissioning interfacesBACnet, Modbus, LoRa and LoRaWAN readyPre-built nodes (blocks) for PAC, RTU and FCU control

No licensing cost on the platform

Contact us